How to Increase Network Signal Strength in Android: 12 Easy Ways

To many people, a poor network signal is equal to having a horrible day. The reason for this is that most individuals rely completely on mobile networks to accomplish everything on their phones, including messaging, calling and browsing the internet.

If it appears that you are having a horrible day because your low network signal is preventing you from doing anything, you have come to the perfect place.

The following articles will show you How to Increase Network Signal Strength in Android

How to Increase Network Signal Strength in Android

How-to-Increase-Network-Signal-Strength-in-Android
wifi, pixabay,1633666_1280.jpg

1. Restart the phone

First, if you’re experiencing low network strength on your phone, restart it. Perhaps your phone needs a network refresh, or perhaps some network updates necessitate a restart in order for items to be properly installed. It’s quite simple to reset your phone. Simply long-press the power button and select restart. Some phones can also be restarted by long-pressing the power button for around 10 seconds.

2. Turn Airplane mode off and back on

Aside from restarting your phone, you may also try resetting your cell network by selecting Airplane Mode. The main point here is that turning on airplane mode disconnects you from the network, and turning it back on reconnects you to the network. You can also try it to improve your poor network signal. Simply pull down the Quick Settings window and enable Airplane Mode. Pause for a few seconds before turning it off again.

3. Update the system

When did you last upgrade your phone? Are you using outdated software? If you use outdated software on your phone, things may go wrong at some point. If your phone’s system upgrades are delayed, you may be susceptible to malware or software problems.

To repair this and ensure that the problem is not caused by that, go to your device’s settings and check for any pending updates, then install them. It is fairly straightforward. Simply go to Settings > System > System Update > Online Update to check and install any pending updates, and then check to see if you still have a poor network signal.

4. Open the windows

It sounds strange, but it can sometimes improve network signal strength on Android. If you reside in a house with high walls or are experiencing severe weather, opening your windows may cause your phone to draw a stronger network signal. It may also occur if your home is far from the network mast. To remedy this, first open your room’s windows and then attempt connecting to the network. If it goes well, you might consider moving somewhere else.

5. Use your phone in another location

Yes. If you consistently have a low network signal in one location, consider shifting to another. The forces fighting against your network signal strength may be beyond your control, particularly if you reside a great distance from the city, or there may be network-blocking materials in your vicinity. The best approach to resolving this is to use your phone in another location. If you’re having problems with the network at home, you can use it at the office.

Otherwise, you may want to try another network carrier. For example, if your phone supports dual SIM cards, you can insert a SIM card from another network carrier into the second port.

6. Remove the case or cover

Though not extremely frequent, your phone case may prevent your phone from acquiring appropriate network signal strength. It usually occurs when you use a metallic case. Metal casings may act against the device’s internal receivers. If you have a case or cover on your phone, please remove it to see if it improves your network signal strength. If this is the case, you should consider purchasing another phone cover. Preferably in a plastic or rubber case.

7. Switch between 3G and 4G

Simultaneously, you can try switching between network modes to improve your network signal strength on Android.

8. Check if the battery is low

When your phone’s battery becomes low, it may enter Ultra Power Saving Mode, which modifies some functionality. Therefore, check to see whether your battery is low and recharge it. Otherwise, you can turn off Ultra Power Saving Mode to restore your network signal strength. However, keep in mind that your battery may run out quickly.

9. Use WiFi Calling

WiFi– calling is a useful feature that allows your phone to send texts and make calls over a Wi-Fi network. Here’s how it works. When your cell network goes down, it automatically switches to a Wi-Fi network, from which you can make calls and send texts. Although not every phone or carrier supports it, it is incorporated into the majority of current phones. So if your phone and carrier support WiFi calling, you’ll have an advantage. To activate WiFi calling on your phone, simply navigate to Settings > Network.

10. Remove the sim card and reinsert it

If you still can’t get a usable network signal strength on your phone, it’s time to try some more technical solutions. We’re talking about reinserting your SIM card. You can even do a quick cleaning of the SIM card along the route.

To accomplish this, take your SIM ejection tool and remove your SIM cards. You can then clean the panel with a clean, gentle cloth before reinstalling it. You can restart your phone after that, but some phones do not require it.

11. Reset the network settings

Could there be an issue with your settings? Perhaps you changed the wrong setting on your device. In this way, we propose that you reset your network settings. This restores all network settings, including Wi-Fi, Bluetooth and mobile networks. Follow the actions outlined below to accomplish that.

  • Step 1: Launch your device’s Settings app and scroll to the bottom of the screen.
  • Step 2: Click System, then Reset Options.
  • Step 3: From there, carefully select Reset Wi-Fi, Mobile, and Bluetooth. To complete the process, select the affected network from the list below the screen and tap Reset Settings.

12. Contact your carrier

You’ve already performed all of the actions required to fix your phone’s weak network signal strength. If everything you’ve done appears to be in vain, contact your network provider.

They can assist you in determining whether there is an issue with your SIM card or if the network is down in general. You can contact your network provider through their social media accounts, their toll-free customer service line, or by visiting their nearest office.

Conclusion

If your network provider says everything is fine but you still have weak network signal strength, your phone is definitely malfunctioning. The best approach to testing this is to switch between multiple mobile networks (SIM cards) on your phone. After determining that the problem is not caused by your SIM card, it is time to visit the repairman.

If you have a TECNO, Infinix, or Itel smartphone,Carlcare is here for you. Carlcare is the official service provider for these brands, and our mission is to give you the best repair service possible. If your network problems persist, simply bring your phone down to our office for repair.

Leave a comment